EasyManuals Logo
Home>Cisco>Network Router>ASR 1001

Cisco ASR 1001 Hardware Installation Guide

Cisco ASR 1001
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Cisco ASR 1000 Series Routers Compatibility Information
The following table lists the Cisco ASR 1000 Series Routers configurations. It shows the combination of
chassis, Cisco ASR1000-ESP, and Cisco ASR1000-SIP supported on the Cisco ASR 1000 Series Routers.
Table 1: Cisco ASR 1000 Series Routers Component Compatibility
ASR 1013ASR 1006ASR 1004
SIP40SIP10*SIP40SIP10SIP40SIP10Embedded
Services
Processor
NoNoYesYesYesYesESP10
NoNoYesYesYesYesESP20
YesYes*YesYesYesYesESP40
YesYesYesYesNoNoESP100
YesYesNoNoNoNoESP200
The Cisco ASR 1001 Router supports Cisco ASR1000-ESP2.5 up to Cisco ASR1000-ESP5. The Cisco
ASR 1002 Router, Cisco ASR 1002-F Router, and Cisco ASR 1002-X Router do not support Cisco
ASR1000-ESP20, Cisco ASR1000-ESP40, Cisco ASR1000-ESP100, or Cisco ASR1000-RP2. Cisco
ASR1000-ESP100 can be installed only on Cisco ASR 1006 and Cisco ASR 1013 routers. Cisco
ASR1000-ESP200 can be installed only on Cisco ASR 1013 routers.
Note
Hardware Compatibility
The following table lists the Cisco ASR 1000 Series Routers that support and are compatible with Cisco
hardware products.
Table 2: Cisco ASR 1000 Series Routers and Component Compatibility and Support Matrix
Cisco ASR 1002-X
Router
Cisco ASR 1001
Router
Cisco ASR 1002
Router and Cisco
ASR 1002-F
Router
Cisco ASR 1004
Router
Cisco ASR 1006
Router
Cisco ASR 1013
Router
Hardware
Component
Not applicableNot applicableSupportedNot supportedNot compatibleNot compatibleASR1000-ESP5
Not applicableNot applicableSupportedSupportedSupportedNot compatibleASR1000-ESP10
Cisco ASR 1000 Series Router Hardware Installation Guide
5
Cisco ASR 1000 Series Routers Hardware Overview
Cisco ASR 1000 Series Routers Compatibility Information

Table of Contents

Other manuals for Cisco ASR 1001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1001 and is the answer not in the manual?

Cisco ASR 1001 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standards-
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB ports quantity1
Ethernet LAN (RJ-45) ports4
VPN tunnels quantity8000
Product colorGray
Rack capacity1U
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)250 W
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory8192 MB
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth461.5 mm
Width439.42 mm
Height43.43 mm
Weight11350 g

Related product manuals