EasyManuals Logo

Cisco ASR 1001 Hardware Installation Guide

Cisco ASR 1001
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
sessions with QoS that are greater than 29000, a different SIP and SPA should be used to map to a different
QFP-3rd-Gen ASIC. This will enable additional schedules and queues.
Features of the Cisco ASR 1000 Series Embedded Services
Processors
The following table summarizes the features of the embedded services processors.
Table 36: Differences in Cisco ASR 1000 Series Embedded Services Processors
Security Traffic
Performance
BandwidthPerformanceMemoryEmbedded Services
Processor
1 Gbps5 Gbps4 Mpps for the
combination of the
following
commonly-used
features: IPv4
forwarding, IP
Multicast, ACL,
QoS, Reverse Path
Forwarding (RPF),
load balancing, and
Sampled NetFlow
256MB Cisco
QuantumFlow
Processor, 5Mb
TCAM, 64 MB
packet buffer, and 1
GB FECP DRAM
Cisco
ASR1000-ESP5
3 Gbps10 Gbps8 Mpps forwarding
for the combination
of the following
commonly-used
features: IPv4
forwarding, IP
Multicast, ACL,
QoS, Reverse Path
Forwarding (RPF),
load balancing, and
Sampled NetFlow
512MB Cisco
QuantumFlow
Processor, 10Mb
TCAM, and 128MB
packet buffer, and 2
GB FECP DRAM
Cisco
ASR1000-ESP10
8 Gbps20 Gbps16 Mpps forwarding
for the combination
of the following
commonly-used
features: IPv4
forwarding, IP
Multicast, ACL,
QoS, Reverse Path
Forwarding (RPF),
load balancing, and
Sampled NetFlow
1 GB Cisco
QuantumFlow
Processor, 40Mb
TCAM, 256 MB
packet buffer, 4 GB
FECP DRAM
Cisco
ASR1000-ESP20
Cisco ASR 1000 Series Router Hardware Installation Guide
94
Cisco ASR 1000 Series Routers Embedded Services Processors
Features of the Cisco ASR 1000 Series Embedded Services Processors

Table of Contents

Other manuals for Cisco ASR 1001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1001 and is the answer not in the manual?

Cisco ASR 1001 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standards-
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB ports quantity1
Ethernet LAN (RJ-45) ports4
VPN tunnels quantity8000
Product colorGray
Rack capacity1U
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)250 W
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory8192 MB
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth461.5 mm
Width439.42 mm
Height43.43 mm
Weight11350 g

Related product manuals