EasyManuals Logo

Cisco ASR 1001 Hardware Installation Guide

Cisco ASR 1001
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #173 background imageLoading...
Page #173 background image
CHAPTER 6
Cisco ASR 1006 Router Overview and Installation
This chapter describes the Cisco ASR 1006 Router and the procedures for installing the Cisco ASR 1006
Router on an equipment shelf or in equipment racks. It also describes how to connect interface and power
cables.
This chapter contains the following sections:
Cisco ASR 1006 Router Description, page 139
Installation Methods, page 143
General Rack Installation Guidelines, page 143
Guidelines for an Equipment Shelf or Tabletop Installation, page 145
Equipment Shelf or Tabletop Installation, page 146
Rack-Mounting the Cisco ASR 1006 Router, page 148
Attaching the Chassis Rack-Mount Brackets, page 149
Installing the Cisco ASR 1006 Router in a Rack, page 153
Attaching the Cable-Management Brackets, page 158
Attaching a Chassis Ground Connection, page 161
Connecting the Shared Port Adapter Cables, page 163
Connecting the Console and Auxiliary Port Cables, page 163
Connecting Power to the Cisco ASR 1006 Router, page 165
Connecting a Terminal to the Cisco ASR 1000 Series RP Console Port, page 176
Connecting the System Cables, page 179
Attaching Cable Retention Bracket on AC Power Supply, page 179
Cisco ASR 1006 Router Description
The Cisco ASR 1006 Router supports full-width card modules. It is designed with a single midplane with
connectors on one interface midplane. The Cisco ASR 1006 Router supports:
Cisco ASR 1000 Series Router Hardware Installation Guide
139

Table of Contents

Other manuals for Cisco ASR 1001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1001 and is the answer not in the manual?

Cisco ASR 1001 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standards-
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB ports quantity1
Ethernet LAN (RJ-45) ports4
VPN tunnels quantity8000
Product colorGray
Rack capacity1U
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)250 W
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory8192 MB
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth461.5 mm
Width439.42 mm
Height43.43 mm
Weight11350 g

Related product manuals