EasyManuals Logo

Cisco ASR 1001 Hardware Installation Guide

Cisco ASR 1001
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #316 background imageLoading...
Page #316 background image
Table 62: Cisco ASR 1002-F Router SPA LEDs
MeaningStateColorLED Label
SONET alarm controller
is shut down.
OffOffC/A
Port is enabled by
software and there is a
valid SONET alarm
signal without any alarms.
OnGreen
Port is enabled by
software and there is at
least one alarm.
OnAmber
Interface is shut down.OffOffA/L
Port is enabled by
software and loopback is
off.
OnGreen
Port is enabled by
software and loopback is
on.
OnAmber
SPA power is off.OffOffSTATUS
SPA is ready and
operational.
OnGreen
SPA power is on and
good and the SPA is
being configured.
OnAmber
Cisco Integrated ASR 1002-SIP10-F and SPA for Cisco ASR 1002-F Router
Description
The Cisco ASR 1002-SIP10-F in the Cisco ASR 1002-F Router is integrated into the chassis and you cannot
insert or remove it. The Cisco integrated ASR 1002-SIP10-F provides the physical and electrical termination
for one half-height SPA.
The Cisco integrated ASR 1002-SIP10-F interface supports all Cisco SPA interface processor functions and
services. However, the Cisco integrated ASR 1002-SIP10-F differs in the following areas:
Functions as the base board for the Cisco integrated RP
Is not a field-replaceable unit (FRU) and does not support online insertion and removal (OIR)
Cisco ASR 1000 Series Router Hardware Installation Guide
282
Cisco ASR 1002-F Router Overview and Installation
Cisco Integrated ASR 1002-SIP10-F and SPA for Cisco ASR 1002-F Router Description

Table of Contents

Other manuals for Cisco ASR 1001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1001 and is the answer not in the manual?

Cisco ASR 1001 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standards-
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB ports quantity1
Ethernet LAN (RJ-45) ports4
VPN tunnels quantity8000
Product colorGray
Rack capacity1U
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)250 W
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory8192 MB
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth461.5 mm
Width439.42 mm
Height43.43 mm
Weight11350 g

Related product manuals