Cisco ASR 1001 Hardware Installation Guide

5-Min: 0.02, status: healthy, under 5.00
15-Min: 0.00, status: healthy, under 5.00
Memory (kb): healthy
Total: 3895500
Used: 547868 (13%), status: healthy, under 90%
Free: 3347632 (81%), status: healthy, over 10%
Committed: 2509772 (60%), status: healthy, under 300%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
User: 1.20, System: 2.10, Nice: 0.00, Idle: 96.70
IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00
SIP0: online, statistics updated 7 seconds ago
Load Average: healthy
1-Min: 0.01, status: healthy, under 5.00
5-Min: 0.02, status: healthy, under 5.00
15-Min: 0.00, status: healthy, under 5.00
Memory (kb): healthy
Total: 483592
Used: 366728 (69%), status: healthy, under 90%
Free: 116864 (22%), status: healthy, over 10%
Committed: 365968 (69%), status: healthy, under 90%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
User: 0.40, System: 0.50, Nice: 0.00, Idle: 99.10
IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00
SIP1: online, statistics updated 6 seconds ago
Load Average: healthy
1-Min: 0.00, status: healthy, under 5.00
5-Min: 0.01, status: healthy, under 5.00
15-Min: 0.00, status: healthy, under 5.00
Memory (kb): healthy
Total: 483592
Used: 351388 (67%), status: healthy, under 90%
Free: 132204 (25%), status: healthy, over 10%
Committed: 365840 (69%), status: healthy, under 90%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
User: 1.80, System: 2.50, Nice: 0.00, Idle: 95.59
IRQ: 0.00, SIRQ: 0.10, IOwait: 0.00
The show diag slot R0 eeprom detail command displays the configuration hardware information including
DRAM and Static RAM (SRAM) on line cards. To display more details than the normal show diag slot R0
eeprom detail command output, use show diag [slot-number] [details].
The following is sample output of the show diag slot R0 eeprom detail command:
Router# show diag slot R0 eeprom detail
Slot R0 EEPROM data:
EEPROM version : 4
Compatible Type : 0xFF
Controller Type : 1460
Hardware Revision : 4.7
PCB Part Number : 73-10253-04
Board Revision : 03
Deviation Number : 0-0
Fab Version : 04
PCB Serial Number : JAB110200CQ
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 68-2625-04
Product Identifier (PID) : ASR1000-RP1
CLEI Code : UNASSIGNED
Version Identifier (VID) : V00
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Asset ID : AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Cisco ASR 1000 Series Router Hardware Installation Guide
16
Cisco ASR 1000 Series Routers Hardware Overview
Environmental Monitoring and Reporting Functions

Cisco ASR 1001 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	4
VPN tunnels quantity	8000
Product color	Gray
Rack capacity	1U
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	8192 MB
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	11350 g