Cisco ASR 1001 Hardware Installation Guide

◦
ENTITY-STATE-MIB
◦
IF-MIB
◦
SONET-MIB
•
MIBs for the Cisco ASR 1001 Router with IDC-4XGE
◦
CISCO-ENTITY-ALARM-MIB
◦
CISCO-ENTITY-FRU-CONTROL-MIB
◦
CISCO-ENTITY-SENSOR-MIB
◦
CISCO-ENTITY-VENDORTYPE-OID-MIB
◦
CISCO-IF-EXTENSION-MIB
◦
ENTITY-MIB
◦
ENTITY-SENSOR-MIB
◦
ENTITY-STATE-MIB
◦
ETHERLIKE-MIB (RFC 3635)
◦
IF-MIB
•
MIBs for the Cisco ASR 1001 Router with IDC-CHT1/E1
◦
CISCO-ENTITY-ALARM-MIB
◦
CISCO-ENTITY-FRU-CONTROL-MIB
◦
CISCO-ENTITY-SENSOR-MIB
◦
CISCO-ENTITY-VENDORTYPE-OID-MIB
◦
CISCO-IF-EXTENSION-MIB
◦
DS1-MIB (RFC 2495)
◦
ENTITY-MIB
◦
ENTITY-SENSOR-MIB
◦
ENTITY-STATE-MIB
◦
IF-MIB
•
MIBs for the Cisco ASR 1001 Router with IDC-4XT3
◦
CISCO-ENTITY-ALARM-MIB
◦
CISCO-ENTITY-FRU-CONTROL-MIB
◦
CISCO-ENTITY-SENSOR-MIB
◦
CISCO-ENTITY-VENDORTYPE-OID-MIB
◦
CISCO-IF-EXTENSION-MIB
◦
ENTITY-MIB
Cisco ASR 1000 Series Router Hardware Installation Guide
662
MIBs Overview
MIBs for the Cisco ASR 1001 Router

Cisco ASR 1001 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	4
VPN tunnels quantity	8000
Product color	Gray
Rack capacity	1U
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	8192 MB
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	11350 g