Cisco ASR 1001 Hardware Installation Guide

Attaching the Cable-Management Bracket 204
Connecting the Shared Port Adapter Cables 205
Connecting the Console and Auxiliary Port Cables 206
Connecting the Ethernet Management Port Cable 207
Connecting Power to Cisco ASR 1004 Router 208
Power Cords Supported by the Cisco ASR 1004 Router 209
Connecting AC Input Power to Cisco ASR 1004 Router 210
Connecting --48 VDC Input Power to Cisco ASR 1004 Router 211
Connecting a Terminal to the Cisco ASR Series 1000 Route Processor Console Port 215
Connecting the Network Management and Signal System Cables 218
CHAPTER 8 Cisco ASR 1002 Router Overview and Installation 219
Cisco ASR 1002 Router Description 219
Front View 220
Rear View 221
Cisco ASR 1002 Router Slot Numbering 222
Cisco ASR 1002 Router Components 223
Cisco Embedded ASR1000-RP1 for Cisco ASR 1002 Router Description 223
Cisco Embedded ASR1000-SIP10 and SPAs for Cisco ASR 1002 Router Description 224
Cisco ASR1000-ESP5 and ASR1000-ESP10 Description 224
Power Supplies in the Cisco ASR 1002 Router 226
AC Power Supply for Cisco ASR 1002 Router 226
48 VDC Power Supply for Cisco ASR 1002 Router 227
24 VDC Power Supply for Cisco ASR 1002 Router 230
24 VDC Power System Input for Cisco ASR 1002 Router 232
+24 VDC Power System Output for Cisco ASR 1002 Router 232
Power Cords Supported by the Cisco ASR 1002 Router 233
Installation Methods 234
General Rack Installation Guidelines 234
Guidelines for an Equipment Shelf or Tabletop Installation 235
Equipment Shelf or Tabletop Installation 236
Rack-Mounting the Cisco ASR 1002 Router 238
Verifying Rack Dimensions 239
Attaching the Chassis Rack-Mount Brackets 240
Chassis Front Rack-Mount Brackets 240
Cisco ASR 1000 Series Router Hardware Installation Guide
ix
Contents

Cisco ASR 1001 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	4
VPN tunnels quantity	8000
Product color	Gray
Rack capacity	1U
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	8192 MB
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	11350 g