Cisco ASR 1001 Hardware Installation Guide

Table 21: Cisco ASR 1004 Router – 48 VDC Power Supply LEDs
DescriptionColorLEDLED Label
LED illuminates green to
signal that the –48 VDC
power supply input
voltage is greater
than–43.5VDC at turn-on
and remains green down
to –39VDC.
GreenA bi-color LED indicates
presence of input voltage
INPUT OK
The LED illuminates
amber when the input
voltage (falls below
–39VDC) and indicates
that there is still a voltage
present (voltage on the
terminal block). The LED
remains amber and is
active to around 20 V
+/-5 V. The LED is not
illuminated if the input is
below –15 V.
Amber
The LED illuminates s
green when all fans are
operational.
GreenA bi-color LED indicates
power supply fan status
FAN OK
The LED illuminates red
when a fan failure is
detected.
Red
Cisco ASR 1000 Series Router Hardware Installation Guide
64
Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1004 Router –48 VDC Power Supply LEDs and Connector

Cisco ASR 1001 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	4
VPN tunnels quantity	8000
Product color	Gray
Rack capacity	1U
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	8192 MB
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	11350 g