Cisco CRS-1 - Carrier Routing System Router User Manual

Chapter 5 Provisioning Additional Subsystems
Provisioning the HTTP Subsystem
5-8
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Provisioning the HTTP Subsystem
Note The HTTP subsystem is available only if your system has a license installed for
one of the following product packages:
- Unified IP IVR
- Unified CCX Premium
The Cisco CRS system uses the HTTP subsystem to enable CRS applications to
respond to requests from a variety of web clients, including computers and IP
phones.
Note If you are not using HTTP applications, you do not need to provision the HTTP
subsystem.
The CRS system uses subdirectories in the Cisco CRS installation directory to
store text substitution, eXtensible Style Language (xsl) templates, static and
dynamic web pages, and Java Servlet Pages (JSPs).
Note Use the Document Management page to upload these documents. For more
information on the Document Management page, see Chapter 7, “Managing
Prompts, Grammars, Documents, and Custom Files.”
To provision the HTTP subsystem, you need to provision HTTP triggers. HTTP
applications use triggers to activate the application in response to an incoming
HTTP message.
In addition—if necessary—you can change the TCP/IP port used by the HTTP
server.
This section describes:
• Configuring HTTP Triggers, page 5-9
• Changing Port Numbers, page 5-10

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English