Cisco CRS-1 - Carrier Routing System Router User Manual

7-17
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Chapter 7 Managing Prompts, Grammars, Documents, and Custom Files
Managing Custom Files
Note Several processes need to be restarted on all nodes in the cluster after you make
changes to this configuration page (see Custom Classes/Steps/Subsystems
Configuration, page 13-6).
Specify the Custom Steps Startup Order
Use these Custom Steps Start Up Order pages to specify the order in which
custom steps or palettes will execute.
Procedure
Step 1 From the CRS Administration menu bar, select System > Custom File
Configuration.
The Custom File Configuration web page opens.
Step 2 On the navigation bar, click the List of Custom Steps hyperlink to access the
Custom Steps Startup Order area.
Step 3 Optionally, click the Enter a New Pallette hyperlink and use the dialog box to
specify a pallette name.
Step 4 Optionally, click the Enter a New Step hyperlink and use the dialog box to
specify a step name.
A new step is created under the palette.
Step 5 Use the arrow keys to move items up and down on the Select the Order of startup
list.
Step 6 Click Update when your selections are complete.
Note Several processes need to be restarted on all nodes in the cluster after you make
changes to this configuration page (see Custom Classes/Steps/Subsystems
Configuration, page 13-6).

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English