Cisco CRS-1 - Carrier Routing System Router User Manual

Chapter 15 The Subsystems Menu
The MRCP TTS Menu Option
15-24
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
The Provider Name drop-down list displays the MRCP TTS providers supported
by the Cisco CRS administration.
MRCP TTS Server Configuration
You need at least one MRCP TTS Server associated with each configured
provider.
Use the MRCP TTS Server Configuration web pages to display, add, modify, and
delete the text-to-speech server’s name, port location, and available language.
Note You must have a MRCP TTS Provider defined before you can provision a MRCP
TTS Server.
On any MRCP TTS Configuration web page, click the MRCP TTS Server
hyperlink on the navigation bar to access the MRCP TTS Servers Configuration
summary web page.
To modify an existing MRCP TTS Server, click any hyperlink within the server’s
summary table entry; the MRCP TTS Server Configuration web page opens.
To add a new MRCP TTS Server, click the Add MRCP TTS Server hyperlink.
(For more information, see the section that follows.)
Add a New MRCP TTS Server
To access the MRCP TTS Server Configuration page, click the Add MRCP TTS
Server hyperlink.
Use the MRCP TTS Default Genders Configuration web page to display or
modify the gender setting for each Locale.
On any MRCP TTS Configuration web page, click the MRCP TTS Default
Genders hyperlink on the navigation bar to access the MRCP TTS Default
Genders Configuration summary web page.
The Locale radio button has the Male, Female, or Neutral options.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English