Cisco CRS-1 - Carrier Routing System Router User Manual

8-7
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Chapter 8 Managing the Cisco CRS System
Managing the Control Center
• The standby server becomes the new active server. Until the former active
server is recovered or a new Unified CCX server is brought online, the system
will be running without any standby capability. When the former active server
or a new server is brought online, it will become the new standby server.
Network Partitions
Network malfunction or misconfiguration can create network partitions and split
the network into separate islands. If a node enters this state, the node is referred
to as being in the island mode. Nodes in the island mode are hard to detect. While
these nodes can communicate within a partitioned island, they cannot
communicate between partitioned islands. If the islands do not communicate, then
each island will select its own active server.
Generally, you can connect to the Cisco CRS administration on any node, and see
a consistent cluster view. If a node is in the island mode, you will see different
cluster views when you connect to nodes in each island.
If your node enters the island mode, perform one of the following tasks:
• restart every cluster node, or
• stop all cluster nodes, and restart the cluster nodes.
If the cluster node cannot be restarted, first ensure that all nodes are functioning
as desired. Next, from each node, verify the accessibility to every other node.
Managing the Control Center
Use the Control Center Server Configuration pages to:
• Add licenses (see Adding Licenses and Activating Components, page 8-10
• Activate or deactivate components (see Activating a Component, page 8-11)
• Remove a server from the cluster (see Removing a Server, page 8-12)
• Disable a server temporarily or permanently (see Disabling a Server,
page 8-13
• Start, stop, and restart services (see Starting, Stopping, and Restarting
Cisco CRS Services, page 8-14)
• Reelect master for a particular service (see Reelect Master, page 8-15)

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English