Comtech EF Data CDM-625A - Page 366

CDM-625A Advanced Satellite Modem MN-CDM625A
Serial-based Remote Product Management Revision 4
8–52
Parameter
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
…Equipment ID
(cont.)
Y=AES Encryption, where:
0=Not installed
1=Installed
Z=Advanced NetworkTiming, where:
0=Not installed
1=Installed
a=Carrier ID, where:
0=Not installed
1=Installed
b=CnC Activation, where:
0=Not installed
1=Installed
c=VersaFEC-2 CCM data rate option, where:
0=Base, up to 5Mbps
1=up to 10 Mbps
2=up to 15 Mbps
3=up to 20 Mbps
4=up to 25 Mbps
d=VersaFEC-2 ACM symbol rate option, where:
0=None
1=up to 1200 ksps
2=up to 2000 ksps
3=up to 4100 ksps
4=up to 8000 ksps
5=up to 12500 ksps
s=spares (0)
600/L Emulation: See CDM-600/600L manual
EXAMPLE: <0/EID=A62510110010174484312105511111450 indicates all firmware options, TPC/LDPC card installed,
VersaFEC-2 card installed, and Network Processor card installed.
NOTE: To achieve LDPC or TPC to 25 Mbps, the modem requires:
• Hardware option B, slot 1, a TPC/LDPC Codec;
• Firmware options: L: data rate FAST option to 25 Mbps AND M:TPC/LDPC data rate FAST option to 25 Mbps.