Comtech EF Data CDM-625A - Page 365

CDM-625A Advanced Satellite Modem MN-CDM625A
Serial-based Remote Product Management Revision 4
8–51
Parameter
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
...Equipment ID
(cont.)
7=up to 20 Mbps
8=up to 25 Mbps
P=VersaFEC CCM data rate option, where:
0=No VersaFEC CCM FAST installed
1=up to 1.1Mbps
2=up to 2.5Mbps
3=up to 5 Mbps
4=up to 16Mbps
Q=IP-ACM symbol rate option, where:
0=None
1=up to 300ksym/sec
2=up to 1200ksym/sec
3=up to 4100ksym/sec
R=Framing option, where:
0=Standard: (Unframed, EDMAC, EDMAC2)
1=Option 0 plus Open Network (IBS with hi-rate ESC, IDR, Audio)
S=D&I option, where:
0=None
1=D&I,D&I++ for single port E1/T1
2=Option 1 plus Quad D&I (4 ports)
T=G.703 Clock Extension, where:
0=Not installed
1=installed on
U=Time based CnC option, where:
0=Not installed
1=Fractional CnC installed
2=Time Limited CnC installed
3=Option 1 and Option 2
V=Header Compression, where:
0=None
1=up to 5Mbps / 2000ksps (ACM)
2=up to 10Mbps / 4100ksps (ACM)
3=up to 15Mbps / 8000ksps (ACM)
4=up to 20Mbps / 12500ksps (ACM)
5=up to 25Mbps / 12500ksps (ACM)
W=Payload Compression, where:
0=None
1=up to 5Mbps / 2000ksps (ACM)
2=up to 10Mbps / 4100ksps (ACM)
3=up to 15Mbps / 8000ksps (ACM)
4=up to 20Mbps / 12500ksps (ACM)
5=up to 25Mbps / 12500ksps (ACM)
X=Advanced QoS, where:
0=Not installed
1=Installed