IMS.OM.002949.DRM Page 30 of 310 Version 1.4
Doremi Labs
Figure 3: IMS1000 with Barco Faceplate
Figure 4: IMS1000 with Christie Faceplate
Ethernet
● The IMS1000 has two built-in Gigabit Ethernet connectors. The left one is identified as
ETH1 and the right one is identified as ETH0.
eSATA
● Used for ingesting content at four times the maximum transfer rate of USB 2.0.
USB
● There are three USB 2.0 ports on the front panel that can accommodate an external
USB device, such as the CaptiView transmitter or USB external drive for content
ingestion.
HDMI
To be used for inputting of alternative content, i.e., Blu-ray Disc player, Gaming, Digital
Cameras or Laptop presentations.
HDCP (High-bandwidth Digital Content Protection) supported
To Next Page
Loading...
