Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 275
Important
Some settings via software are protected with a password.
Password-protected settings are used to set up the basic machine
configuration and may only be adjusted by qualified personnel.
The password is 25483.
Displaying Help
To display Help:
1. Press the Help button.
The button is highlighted with a red circle .
⑤
Display of selected seam pattern
• the display changes with the
setting of the pocket program
(with/without flap).
⑥
Positioning point seam beginning
Positioning point seam center
Positioning point seam end
p. 301
⑦
Quick selection corner knife
correction seam begin.
Quick selection corner knife
correction seam end
p. 320
p. 320
⑧
Info field displaying current status
information / program name
⑨
Toolbox p. 355
⑩
Help p. 275
⑪
User password p. 429
⑫
Service menu p. 347
⑬
Program parameters
• Configuring pocket programs
p. 294
No. Control panel Description
To Next Page
Loading...
