Enterasys G3G170-24 - Set Port Alias; Setting Speed and Duplex Mode; Purpose

set port alias
Enterasys G-Series CLI Reference 4-9
Example
Thisexampleshowshowtodisplayaliasinformationforports1‐3onslot3:
G3(rw)->show port alias ge.3.1-3
Port ge.3.1 user
Port ge.3.2 user
Port ge.3.3 Admin
set port alias
Usethiscommandtoassignanaliasnametoaport.
Syntax
set port alias port-string [name]
Parameters
Defaults
Ifnameisnotspecified,the aliasassignedtotheportwillbecleared.
Mode
Switchcommand,read‐write.
Examples
Thisexampleshowshowtoassignthealias“A d m i n ” toge.3.3:
G3(rw)->set port alias ge.3.3 Admin
Thisexampleshowshowtoclearthealiasforge.3.3:
G3(rw)->set port alias ge.3.3
Setting Speed and Duplex Mode
Purpose
ToreviewandsettheoperationalspeedinMbpsandthe defaultduplexmode:Half,forhalf
duplex,orFull,forfullduplexforoneormoreports.
port‐string Specifiestheporttowhichanaliaswillbeassigned.Foradetailed
descriptionofpossibleport‐stringvalues,referto
“PortStringSyntax
UsedintheCLI”onpage4‐1.
name (Optional)Assignsanaliasnametotheport.Ifthealiasnamecontains
spaces,thetextstringmustbesurroundedbydoublequotes.Maximum
lengthis60characters.
Note: These settings only take effect on ports that have auto-negotiation disabled.