Enterasys G3G170-24 - Show Time

show time
Enterasys G-Series CLI Reference 2-15
Defaults
None.
Mode
Switchcommand,read‐only.
Examples
Thisexampleshowshowtodisplaythesystem’sCPU utilization:
G3(ro)->show system utilization cpu
Total CPU Utilization:
Switch CPU 5 sec 1 min 5 min
-----------------------------------------------
1 1 3% 1% 1%
Thisexampleshowshowtodisplaythesystem’soverallmemoryusage:
G3(ro)->show system utilization storage
Storage Utilization:
Type Description Size(Kb) Available (Kb)
---------------------------------------------------------------
RAM RAM device 262144 97173
Flash Images, Config, Other 31095 8094
Thisexampleshowshowtodisplayinformationabouttheprocessesrunningonthesystem.Only
partialoutputisshown.
G3(ro)->show system utilization process
TID Name 5Sec 1Min 5Min
8d45148 captureTask 0.00% 0.00% 0.00%
8e264f8 poe_monitor 0.00% 0.01% 0.05%
8ea6d38 poe_read 0.80% 0.22% 0.20%
8eb7140 vlanDynEg 0.00% 0.00% 0.00%
8f0be10 tcdpSendTask 0.00% 0.00% 0.00%
8f1c0e8 tcdpTask 0.00% 0.00% 0.00%
show time
Usethiscommandtodisplaythecurrenttimeofdayinthesystemclock.
Syntax
show time
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.