Enterasys G3G170-24 - Show Ipv6 Ospf Neighbor

show ipv6 ospf neighbor
19-40 OSPFv3 Configuration
show ipv6 ospf neighbor
ThiscommanddisplaysinformationaboutOSPFv3neighbors.
Syntax
show ipv6 ospf neighbor [interface {vlan vlanid | tunnel tunnelid}] [neighborid]
Parameters
Defaults
Whennoparametersarespecified,informationaboutallneighborsisdisplayed.
Mode
Routerprivilegedexecution:G3(su)‐>router#
Usage
IfyoudonotspecifyaneighborrouterID,theoutputdisplayssummaryinformationinatable.If
youspecifyaninterfaceortunnel,onlytheinformationforthatinterfaceortunneldisplays.
WhenyouspecifyaneighborbyrouterID,detailedinformationabouttheneighbordisplays.
External LSA Count Total number of AS External link-state advertisements in this
area’s link-state database.
LSAs Received Number of link-state advertisements received.
Originate New LSAs Number of LSAs originated.
Sent Packets The number of OSPFv3 packets sent on the interface.
Received Packets The number of OSPFv3 packets received on the interface.
Discards Number of packets discarded.
Bad Version Number of bad version packets received.
Virtual Link Not Found Number of virtual link not found packets received.
Area Mismatch Number of area mismatch packets received.
Invalid Destination Address Number of invalid destination address packets received.
No Neighbor at Source Address Number of no neighbor at source address packets received.
Invalid OSPF Packet Type Number of packets received with invalid packet type.
Packet Type / Sent / Received Columns listing packet types and number of packets sent and
received per type.
Table 19-8 show ipv6 ospf interface stats Output Details
Output Field What It Displays...
interface (Optional)Restrictstheoutputdisplaytoaspecificinterface.
vlanvlanid SpecifytheVLANinterfacetodisplayinformationabout.
tunneltunnelid Specifythetunnelinterfacetodisplay
neighborid (Optional)SpecifytheneighborbyitsrouterID,specifiedin32‐bit
dottedquadformat.