Enterasys G3G170-24 - Clear Tftp Retry; Clearing and Closing the CLI; Purpose; Commands

clear tftp retry
2-50 Basic Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplesetstheretrycountto3.
G3(rw)->set tftp retry 3
clear tftp retry
UsethiscommandtoresettheTFTPretryvaluetothedefaultvalueof5retries.
Syntax
clear tftp retry
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocleartheretryvaluetothedefaultof5retries.
G3(rw)-> clear tftp retry
Clearing and Closing the CLI
Purpose
TocleartheCLIscreenortocloseyourCLIsession.
Commands
ThecommandsusedtoclearandclosetheCLIsessionarelistedbelow.
For information about... Refer to page...
cls 2-51
exit 2-51