Enterasys G3G170-24 - Set Macauthentication Password; Clear Macauthentication Password; Set Macauthentication Port

set macauthentication password
Enterasys G-Series CLI Reference 20-23
set macauthentication password
UsethiscommandtosetaMACauthenticationpassword.
Syntax
set macauthentication password password
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosettheMACauthenticationpasswordto“macauth”:
G3(su)->set macauthentication password macauth
clear macauthentication password
UsethiscommandtocleartheMACauthenticationpassword.
Syntax
clear macauthentication password
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheMACauthenticationpassword:
G3(su)->clear macauthentication password
set macauthentication port
UsethiscommandtoenableordisableoneormoreportsforMACauthentication.
Syntax
set macauthentication port {enable | disable} port-string
password SpecifiesatextstringMACauthenticationpassword.