Enterasys G3G170-24 - Show Multiauth Session; Show Multiauth Station

show multiauth station
20-36 Security Configuration
show multiauth station
Usethiscommandtodisplaymultipleauthenticationstation(enduser)entries.
Syntax
show multiauth station [mac address] [port port-string]
Parameters
Mode
Switchcommand,read‐only.
Defaults
Ifnooptionsarespecified,multipleauthenticationstationentrieswillbedisplayedforallMAC
addressesandports.
Example
Thisexampleshowshowtodisplaymultipleauthenticationstationentries.Inthiscase,twoend
userMACaddressesareshown:
G3(rw)->show multiauth station
Port Address type Address
------------ ------------ ------------------------
ge.1.20 mac 00-10-a4-9e-24-87
ge.2.16 mac 00-b0-d0-e5-0c-d0
show multiauth session
Usethiscommandtodisplaymultipleauthenticationsessionentries.
Syntax
show multiauth session [all] [agent {dot1x | mac | pwa}] [mac address]
[port port-string]
Parameters
macaddress (Optional)Displaysmultip leauthenticationstationentriesforspecificMAC
address(es).
portport‐string (Optional)Displaysmultipleauthenticationstationentriesforspecific
port(s).
all (Optional)Displaysinformationaboutallsessions,includingthosewith
terminatedstatus.
agentdot1x|mac|
pwa
(Optional)Displays802.1X,orMA C,orportwebauthenticationsession
information.
macaddress (Optional)Displaysmultipleauthenticationsessionentriesforspecific
MACaddress(es).
portport‐string (Optional)Displaysmultipleauthenticationsessionentriesforthe 
specifiedportor
ports.