Enterasys G3G170-24 - Clear Snmp Targetparams

clear snmp targetparams
5-24 SNMP Configuration
Defaults
None.
Ifnotspecified,securitylevelwillbesettonoauthentication.
Ifnotspecified,storagetypewillbesettononvolatile.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetSNMPtargetparametersnamed“v1ExamplePa rams”forauser
named“fred”usingversion3securitymodelandmessageprocessing,andauthentication:
G3(su)->set snmp targetparams v1ExampleParams user fred security-model usm
message-processing v3 authentication
clear snmp targetparams
UsethiscommandtocleartheSNMPtargetparameterconfiguration.
Syntax
clear snmp targetparams targetParams
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
useruser SpecifiesanSNMPv1orv2communitynameoranSNMPv3username.
Maximumlengthis32bytes.
security‐modelv1|
v2c|usm
SpecifiestheSNMPsecuritymodelappliedtothistargetparameteras
version1,2cor3(usm).
message‐
processingv1|v2c
|
v3
SpecifiestheSNMPmessageprocessingmodelappliedtothistarget
parameterasversion1,2cor3.
noauthentication|
authentication|
privacy
(Optional)SpecifiestheSNMPsecuritylevelappliedtothistarget
parameterasnoauthentication,authentication(withoutprivacy)or
privacy.Privacyspecifiesthatmessagessentonbehalfoftheuser
are
protectedfromdisclosure.
volatile|
nonvolatile
(Optional)Specifiesthestoragetypeappliedtothistargetparameter.
targetParams SpecifiesthenameoftheparameterintheSNMPtargetparameterstable
tobecleared.