Enterasys G3G170-24 - Ip Rip Authentication-Key; Ip Rip Receive Version

ip rip receive version
Enterasys G-Series CLI Reference 16-5
ip rip receive version
UsethiscommandtosettheRIPversion(s)forRIPupdatepacketsacceptedonaninterface.The
noversionofthiscommandsetstheacceptablereceiveversionoftheRIPupdatepacketstoRIPv1.
Syntax
ip rip receive version {1 | 2 | 1 2 | none}
no ip rip receive version
Parameters
Mode
Interfaceconfiguration:G3(su)‐>router(Config‐if(Vlan1))#
Defaults
None.
Example
ThisexampleshowshowtosettheRIPreceiveversionto2forupdatepacketsreceivedonthe
VLAN1interface:
G3(su)->router(Config)#interface vlan 1
G3(su)->router(Config-if(Vlan 1))#ip rip receive version 2
ip rip authentication-key
UsethiscommandtoenableordisableaRIPauthenticationkey(password)foruseonan
interface.ThenoformofthiscommandpreventsRIPfromusingauthentication.
Syntax
ip rip authentication-key name
no ip rip authentication-key
Parameters
Defaults
None.
Mode
Interfaceconfiguration:G3(su)‐>router(Config‐if(Vlan1))#
1 SpecifiesRIPversion1.Thisisthedefaultsetting.
2 SpecifiesRIPversion2.
12 SpecifiesRIPversions1and2.
none SpecifiesthatnoRIProuteswillbeprocessedonthisinterface.
name Specifies thepasswordtoenableordisableforRIPauthentication.