Enterasys G3G170-24 - Set Gvrp; Clear Gvrp

set gvrp
7-22 802.1Q VLAN Configuration
set gvrp
UsethiscommandtoenableordisableGVRPgloballyonthedeviceorononeormoreports.
Syntax
set gvrp {enable | disable} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPwillbedisabledorenabledforallports.
Mode
Switchcommand,read‐write.
Examples
ThisexampleshowshowtoenableGVRPgloballyonthedevice:
G3(su)->set gvrp enable
ThisexampleshowshowtodisableGVRPgloballyonthedevice:
G3(su)->set gvrp disable
ThisexampleshowshowtoenableGVRPonge.1.3:
G3(su)->set gvrp enable ge.1.3
clear gvrp
UsethiscommandtoclearGVRPstatusorononeormoreports.
Syntax
clear gvrp [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPstatuswillbeclearedforallports.
Mode
Switchcommand,read‐write.
disable|
enable
DisablesorenablesGVRPonthedevice.
port‐string (Optional)DisablesorenablesGVRPonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsedin
theCLI”onpage 4 ‐1.
port‐string (Optional)ClearsGVRP statusonspecificport(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”on
page 4‐1.