Enterasys G3G170-24 - Arp; Show Ip Arp Output Details

arp
15-12 IP Configuration
Defaults
Ifnoparametersarespecified,allentriesintheARPcachewillbedisplayed.
Mode
Anyroutermode.
Example
Thisexampleshowshowtousetheshowiparpcommand:
G3(su)->router#show ip arp
Protocol Address Age (min) Hardware Addr Type Interface
------------------------------------------------------------------------------
Internet 134.141.235.251 0 0003.4712.7a99 ARPA Vlan1
Internet 134.141.235.165 - 0002.1664.a5b3 ARPA Vlan1
Internet 134.141.235.167 4 00d0.cf00.4b74 ARPA Vlan2
G3(su)->router#show ip arp 134.141.235.165
Protocol Address Age (min) Hardware Addr Type Interface
------------------------------------------------------------------------------
Internet 134.141.235.165 - 0002.1664.a5b3 ARPA Vlan2
G3(su)->router#show ip arp vlan 2
Protocol Address Age (min) Hardware Addr Type Interface
------------------------------------------------------------------------------
Internet 134.141.235.251 0 0003.4712.7a99 ARPA Vlan2
Table 15‐2provides anexplanationofthecommandoutput.
arp
Usethiscommandtoaddorremovepermanent(static)ARPtableentries.Upto1,000staticARP
entriesaresupportedperG‐Seriessystem.AmulticastMACaddresscanbeusedinastaticARP
entry.ThenoformofthiscommandremovesthespecifiedpermanentARPentry:
Syntax
arp ip-address mac-address
no arp ip-address
Table 15-2 show ip arp Output Details
Output Field What It Displays...
Protocol ARP entry’s type of network address.
Address Network address mapped to the entry’s MAC address.
Age (min) Interval (in minutes) since the entry was entered in the table.
Hardware Addr MAC address mapped to the entry’s network address.
Type Encapsulation type used for the entry’s network address.
Interface Interface (VLAN or loopback) through which the entry was learned.