Enterasys G3G170-24 - Set History; Show History

show history
11-12 Logging and Network Management
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythecontentsofthecommandhistorybuffer.Itshowsthereare 
fivecommandsinthebuffer:
G3(su)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
show history
Usethiscommandtodisplaythesize(inlines)ofthehistorybuffer.
Syntax
show history
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythesizeofthehistorybuffer:
G3(su)->show history
History buffer size: 20
set history
Usethiscommandtosetthesizeofthehistorybuffer.
Syntax
set history size [default]
Parameters
Defaults
None.
size Specifiesthesizeofthehistorybufferinlines.Validvaluesare1to100.
default (Optional)Makesthissettingpersistentforallfuturesessions.