Enterasys G3G170-24 - Show Cos Port-Config

show cos port-config
8-22 Policy Classification Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
CoSIRLportgroupsareidentifiedbygroupnumberandthetypeofportsinthegroup,inthe
formofgroup#.port‐type.TheIRLportgroup0.0exists bydefault.Thisdefaultportgroupcannot
beremovedandallphysicalportsinthesystemareassignedtoit.Up
tosevenadditionalport
groups(1through7)canbeconfigured.Currently,onlyoneporttype(type0)issupported.This
porttypesupports100limiters.
Additionalportgroupsmaybecreatedforflexibility.Portsassignedtoanewportgroupmustbe
mutuallyexclusivefromtheotherportgroupentries—ports
areautomaticallyremovedfromthe
defaultportgroup—andmustbecomprisedofthesameporttypeasdefinedbytheportgroup.
Thecreationofadditionalportgroupscouldbeusedtocombinesimilarportsbytheirfunctionfor
flexibility.Forinstance,portsassociatedtouserscanbeaddedtoa
portgroupcalled“Users”and
portsassociatedtouplinkportscanbeaddedtoaportgroupcalled“Uplink.”Usingtheseport
groups,asingleclassofservicecanassigndifferentratelimitstoeachportgroup.“User”ports
canbeassignedoneratelimit,while“Uplink”portscanbeassigned
another.DFEsupportsa
maximumof8portgroupsperCoSfunction(IRL).
Thecommandshowcosport‐configdisplayseachIRLportgroupconfiguredbygroupandtype,
withthegroupnameandassociated(assigned)ports.Thecommandshowcosport‐typedisplays
theavailableinboundratelimitingresources
fortheporttype.
Example
Thisexampleconfigurestwoportgroups,oneforuserportsandoneforuplinkportsandassign
portstothegroups.Portgroup1.0willrepresentuserports,group2.0willrepresentuplinkports.
G3(su)->set cos port-config irl 1.0 name Users ports ge.1.1-46
G3(su)->set cos port-config irl 2.0 name Uplink ports ge.1.47-48
show cos port-config
Usethiscommandtoshowinboundratelimitinggroupsandtheassignedports.
Syntax
show cos port-config [irl group-type-index]
Parameters
portsport‐list (Optional)Portsassignedtothegroup.Allportsmustbeofthesameport
type(FastEthernet,GigabitEthernet).
append (Optional)Append(add)theportstotheportsthatarealreadyinthe
group.
clear (Optional)Clearthegivenportsfromthoseassignedtothegroup.
irl (Optional)Specifiesthatinboundratelimitingconfigurationinformation
shouldbedisplayed.