Enterasys G3G170-24 - Clear Vlanauthorization; Set Vlanauthorization Egress

set vlanauthorization egress
20-44 Security Configuration
set vlanauthorization egress
ControlsthemodificationofthecurrentVLANegresslistof802.1xauthenticatedportsforthe
VLANsreturnedintheRADIUSauthorizationfilteridstring.
Syntax
set vlanauthorization egress {none | tagged | untagged} port-string
Parameters
Defaults
Bydefault,administrativeegressissettountagged.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenabletheinsertionoftheRADIUSassignedVLANtoan802.1qtag
foralloutboundframesforports10through15onunit/modulenumber3.
G3(rw)->set vlanauthorization egress tagged ge.3.10-15
clear vlanauthorization
Usethiscommandtoreturnport(s)tothedefaultconfigurationofVLANauthorizationdisabled,
egressuntagged.
Syntax
clear vlanauthorization [port-string]
Parameters
Defaults
Ifnoportstringisentered,allportsawillberesettodefaultconfigurationwithVLAN
authorizationdisabledandegressframesuntagged.
none Specifiesthatnoegressmanipulationwillbemade.
tagged Specifiesthattheauthenticatingportwillbeaddedtothecurrenttagged
egressfortheVLAN‐IDreturned.
untagged Specifiesthat
theauthenticatingportwillbeaddedtothecurrent
untaggedegressfortheVLAN‐IDreturned(default).
port‐string Specifiesthattheportorlistofports.towhichthiscommandwillapply.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI
”onpage 4‐1.
port‐string (Optional)Specifieswhichportsaretoberestoredtodefault
configuration.Ifnoportstringisentered,theactionwillbeaglobal
setting.Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 4‐1.