Enterasys G3G170-24 - Clear Policy All-Rules; Assigning Ports to Policy Profiles; Commands; Purpose

clear policy all-rules
Enterasys G-Series CLI Reference 8-13
Thisexampleshowshowtoremovearulefrompolicyprofile5thatwillforwardUDPframes
fromsourceport45:
G3(su)->clear policy rule 5 udpportsource 45 forward
clear policy all-rules
Usethiscommandtoremoveallpolicyclassificationrules.
Syntax
clear policy all-rules
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoremovealladministrativeandpolicyindexrules:
G3(su)->clear policy all-rules
Assigning Ports to Policy Profiles
Purpose
Toassignandunassignportstopolicyprofiles.
Commands
set policy port
Usethiscommandtoassignportstoapolicyprofile.
Syntax
set policy port port-string profile-index
For information about... Refer to page...
set policy port 8-13
clear policy port 8-14