Enterasys G3G170-24 - Clear Vlan Name; Assigning Port VLAN Ids (Pvids) and Ingress Filtering; Commands; Purpose

clear vlan name
7-6 802.1Q VLAN Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoremoveastaticVLAN9fromthedevice’sVLANlist:
G3(su)->clear vlan 9
clear vlan name
UsethiscommandtoremovethenameofaVLANfromtheVLANlist.
Syntax
clear vlan name vlan-list
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearthenameforVLAN9:
G3(su)->clear vlan name 9
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Purpose
ToassigndefaultVLANIDstountaggedframesononeormoreports,toconfigureVLANingress
filteringand constraints,andtosettheframediscardmode.
Commands
vlan‐list SpecifiestheVLANIDofthe VLAN(s)forwhichthenamewillbecleared.
For information about... Refer to page...
show port vlan 7-7
set port vlan 7-7
clear port vlan 7-8