Enterasys G3G170-24 - Show Banner Motd; Set Banner Motd

show banner motd
2-20 Basic Configuration
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthecommandprompttoSwitch1:
G3(su)->set prompt “Switch 1”
Switch 1(su)->
show banner motd
Usethiscommandtoshowthebannermessageofthedaythatwilldisplayatsessionlogin.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythebannermessageoftheday:
G3(rw)->show banner motd
O Knights of Ni, you are just and
fair, and we will return with a shrubbery
-King Arthur
set banner motd
Usethiscommandtosetthebannermessageofthedaydisplayedatsessionlogin.
Syntax
set banner motd message
Parameters
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.
message Specifiesamessageoftheday.Thisisatextstringthatneedstobein
doublequotesifanyspacesareused.Usea\nforanewlineand\tfora
tab(eightspaces).