Enterasys G3G170-24 - Show Ip Pimsm Neighbor; Show Ip Pimsm Rp; Show Ip Pimsm Neighbor Output Detail

show ip pimsm neighbor
16-52 IPv4 Routing Protocol Configuration
show ip pimsm neighbor
Displaytherouter’sPIMneighbors.
Syntax
show ip pimsm neighbor [vlan-id]
Parameters
Mode
Anyroutermode.
Defaults
IftheVLANidisomitted,allneighborsoffallinterfaceswillbedisplayed.
Example
ThisexampleshowshowtodisplayPIMinformation:
G3(su)->router> show ip pimsm neighbor
NEIGHBOR TABLE
Vlan ID IP Address Up Time Expiry Time
(hh:mm:ss) (hh:mm:ss)
--------- ---------------- ---------- ------------
30 192.168.30.2 01:36:41 00:01:25
6 192.168.6.1 01:36:41 00:01:25
Table 16‐11providesanexplanationofthecommandoutput.
show ip pimsm rp
ThiscommanddisplaysthePIMinformationforcandidateRendezvousPoints(RPs)forallIP
multicastgroupsorforaspecificgroupaddress.Theinformationinthetableisdisplayedforeach
IPmulticastgroup.
Syntax
show ip pimsm rp {group-address group-mask | all | candidate}
vlan‐id (Optional)DisplayallneighborsdiscoveredonaspecificInterface.
Table 16-11 show ip pimsm neighbor Output Details
Output Field What it displays
Vlan ID VLAN id of the interface.
IP Address The IP Address of the neighbor on an interface
Up Time The time since this neighbor has become active on this interface.
Expiry Time The expiry time of the neighbor on this interface.