Enterasys G3G170-24 - Clear Pwa Banner; Set Pwa Displaylogo

clear pwa banner
Enterasys G-Series CLI Reference 20-61
clear pwa banner
UsethiscommandtoresetthePWAloginbanner toablankstring.
Syntax
clear pwa banner
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetthePWAloginbannertoablankstring
G3(su)->clear pwa banner
set pwa displaylogo
UsethiscommandtosetthedisplayoptionsfortheEnterasysNetworkslogo.
Syntax
set pwa displaylogo {display | hide}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtohidetheEnterasysNetworkslogo:
G3(su)->set pwa displaylogo hide
display|hide DisplaysorhidestheEnterasysNetworkslogowhenthePWAwebsite
displays.