Enterasys G3G170-24 - Show Spantree Mstmap; Set Spantree Mstmap

show spantree mstmap
Enterasys G-Series CLI Reference 6-13
Syntax
clear spantree msti [sid sid]
Parameters
Defaults
Ifsidisnotspecified,allMSTinstanceswillbecleared.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodeleteallMSTinstances:
G3(su)->clear spantree msti
show spantree mstmap
UsethiscommandtodisplaythemappingofafilteringdatabaseID(FID)toaSpanningTrees.
SinceVLANsaremappedtoFIDs,thisshowstowhichSIDaVLANismapped.
Syntax
show spantree mstmap [fid fid]
Parameters
Defaults
Iffidisnotspecified,informationforallassignedFIDswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaySIDtoFIDmappinginformationforFID1.Inthiscase,no
newmappingshavebeenconfigured:
G3(su)->show spantree mstmap fid 1
FID: SID:
1 0
set spantree mstmap
UsethiscommandtomaponeormorefilteringdatabaseIDs(FIDs)toaSID.SinceVLANsare
mappedtoFIDs,thisessentiallymapsoneormoreVLANIDstoaSpanningTree(SID).
sidsid (Optional)DeletesaspecificmultipleSpanningTreeID.
fidfid (Optional)DisplaysinformationforspecificFIDs.