Enterasys G3G170-24 - Set Igmpsnooping Add-Static; Set Igmpsnooping Mcrtrexpiretime

set igmpsnooping mcrtrexpiretime
10-6 IGMP Configuration
set igmpsnooping mcrtrexpiretime
UsethiscommandtoconfiguretheIGMPmulticastrouterexpirationtimeforthesystem.
Syntax
set igmpsnooping mcrtrexpire time
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thistimerisforexpiringtheswitchfromthemulticastdatabase.Ifthetimerexpires,andtheonly
addressleftisthemulticastswitch,thentheentrywillberemoved.
Example
ThisexampleshowshowtosettheIGMPmulticastrouterexpirationtimetoinfinity:
G3(su)->set igmpsnooping mcrtrexpiretime 0
set igmpsnooping add-static
ThiscommandcreatesanewstaticIGMPentryoraddsoneormorenewportstoanexisting 
entry.
Syntax
set igmpsnooping add-static group vlan-list [modify] [port-string]
Parameters
Defaults
Ifnoportsarespecified,allportsareaddedtotheentry.
Ifmodifyisnotspecified,anewentryiscreated.
time SpecifiestheIGMPmulticastrouterexpirationtime.Validvaluesare0‐
3600seconds.Avalueof0willconfigurethesystemwithaninfinite
expirationtime.Thedefaultvalue
is0.
group SpecifiesthemulticastgroupIPaddressfortheentry.
vlan‐list SpecifiestheVLANsonwhichtoconfiguretheentry.
modify (Optional)Addsthespecifiedportorportstoanexistingentry.
port‐string (Optional)Specifiestheportorportstoaddtotheentry.