Enterasys G3G170-24 - Show System Utilization

show system utilization
2-14 Basic Configuration
Example
Thisexampleshowshowtodisplaythesystem’shardwareconfiguration.Pleasenotethatthe
informationyouseedisplayedmaydifferfromthisexample.
G3(su)->show system hardware
SLOT 1 HARDWARE INFORMATION
---------------------------
Model: G3G124-24
Serial Number: 777777777777
Vendor ID: 0xbc00
Base MAC Address: 00:11:88:B1:76:C0
Hardware Version: BCM56514 REV 1
FirmWare Version: 01.00.00.0052
Boot Code Version: 01.00.42
SLOT 2 HARDWARE INFORMATION
---------------------------
Slot is not present.
SLOT 3 HARDWARE INFORMATION
---------------------------
Slot is not present.
SLOT 4 HARDWARE INFORMATION
---------------------------
Model: G3G-24SFP
Serial Number: ------------
Vendor ID: 0xbc00
Base MAC Address: 00:11:88:B1:76:C0
Hardware Version: BCM56512 REV 1
FirmWare Version: 01.00.00.0052
Boot Code Version: 01.00.42
POWER SUPPLY 1 HARDWARE INFORMATION
-----------------------------------
Model:
Serial Number: -
Wattage: 400
Software Version: -
Revision: -
show system utilization
Usethiscommandtodisplaydetailedinformationabouttheprocessorrunningontheswitch,or
theoverallmemoryusageoftheFlashandSDRAMstoragedevicesontheunit,ortheprocesses
runningontheswitch.
Syntax
show system utilization {cpu | storage | process}
Parameters
cpu Displayinformationabouttheprocessorrunningontheswitch.
storage Displayinformationaboutthe overallmemoryusageontheswitch.
process Displayinformationaboutthe processesrunningontheswitch.