Enterasys G3G170-24 - Show Policy Rule Output Details

show policy rule
Enterasys G-Series CLI Reference 8-7
Defaults
Ifverboseisnotspecified,summaryinformationwillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaypolicyclassificationinformationforEthernettype2rules
G3(su)->show policy rule ether
|PID |Rule Type |Rule Data |Mk|PortStr |RS|ST|VLAN|CoS |U|
|02 |Ether |2048 (0x0800) |16|All | A|NV|fwrd| |?|
|02 |Ether |2049 (0x0801) |16|All | A|NV|drop| |?|
|02 |Ether |2989 (0x0bad) |16|All | A|NV|drop| |?|
|02 |Ether |33079 (0x8137) |16|All | A|NV|drop| |?|
Thisexampleshowshowtodisplaypolicyclassificationinformationforadministrativerule1
G3(su)->show policy rule admin-pid 1
|Admin|Rule Type |Rule Data |Mk|PortStr |RS|ST|dPID|aPID|U|
|admin|Port |ge.1.1 |16|ge.1.1 | A|NV| | 1|?|
|admin|Port |ge.1.2 |16|ge.1.2 | A|NV| | 1|?|
|admin|Port |ge.1.3 |16|ge.1.3 | A|NV| | 1|?|
|admin|Port |ge.1.4 |16|ge.1.4 | A|NV| | 1|?|
|admin|Port |ge.1.5 |16|ge.1.5 | A|NV| | 1|?|
|admin|Port |ge.1.6 |16|ge.1.6 | A|NV| | 1|?|
|admin|Port |ge.1.7 |16|ge.1.7 | A|NV| | 1|?|
|admin|Port |ge.1.8 |16|ge.1.8 | A|NV| | 1|?|
|admin|Port |ge.1.9 |16|ge.1.9 | A|NV| | 1|?|
|admin|Port |ge.1.10 |16|ge.1.10 | A|NV| | 1|?|
|admin|Port |ge.1.11 |16|ge.1.11 | A|NV| | 1|?|
|admin|Port |ge.1.12 |16|ge.1.12 | A|NV| | 1|?|
Table 8‐2providesanexplanationofthecommandoutput.
display‐if‐used (Optional)Displaysrule(s)onlyiftheyareappliedtoatleastoneport.
Table 8-2 show policy rule Output Details
Output Field What It Displays...
PID Profile index number. Assigned to this classification rule with the set policy profile
command (“set policy profile” on page 8-4).
Rule Type Type of classification rule. Refer to Table 8-3 for valid types.
Rule Data Rule data value. Refer to Table 8-3 for valid values for each classification type.
Mk Rule data mask. Refer to Tab le 8 -3 for valid values for each classification data value.
PortStr Ingress port(s) to which this rule applies.
RS Whether or not the status of this rule is active (A), not in service or not ready.
ST Whether or not this rule’s storage type is non-volatile (NV) or volatile (V).
VLAN VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
CoS If applicable, Class of Service value to which this rule applies.
U Whether or not this rule has been used.