Enterasys G3G170-24 - Clear Cos All-Entries; Show Cos Unit

show cos unit
Enterasys G-Series CLI Reference 8-29
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheCoSinboundratelimitingreferenceconfigurationforall
groups:
G3(su)->clear cos reference irl all
show cos unit
UsethiscommandtoshowpossibleCoSunitentries.
Syntax
show cos unit
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowspossibleunitentriesforinboundratelimiting:
G3(su)->show cos unit
Type: Unit:
irl = inbound rate limiting Kbps = Kilobits per second
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Kbps 1000000 512 1
clear cos all-entries
UsethiscommandtoclearallClassofServiceentriesexceptentries0‐7.
Syntax
clear cos all-entries
reference Clearaspecificreferenceforthespecifiedportgroup.