Enterasys G3G170-24 - Show Ipv6 Ospf Database

show ipv6 ospf database
19-32 OSPFv3 Configuration
show ipv6 ospf database
ThiscommanddisplaysinformationaboutthelinkstatedatabasewhenOSPFv3isenabled.
Syntax
show ipv6 ospf [ areaid] database [{external | inter-area { prefix | router} | link |
network | nssa-external | prefix | router | unknown {area | as | link}}]
[lsid] [{adv-router [rtrid] | self-originate | database-summary}]
Parameters
Defaults
Ifnoparametersareentered,LSAheadersforallareasaredisplayed.
Mode
Routerprivilegedexecution:G3(su)‐>router#
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Address of the next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the
next hop.
Table 19-4 show ipv6 ospf asbr Output Details (Continued)
Output Field What It Displays...
areaid (Optional)Displaydatabaseinformationaboutaspecificarea.Enterthe
areaIDinIPaddressformat(dotted‐quad)orasadecimalvalue.
external (Optional)DisplayexternalLSAs.
inter‐area (Optional)Displayinter‐areaLSAs.
prefix (Optional)Displayintra‐areaPrefixLSAs.
router (Optional)DisplayrouterLSAs.
link (Optional)DisplaylinkLSAs.
network (Optional)Displaynetwork
LSAs.
nssa‐external (Optional)DisplayNSSAexternalLSAs.
unknown
{area|as|link}
(Optional)Displayunknownarea,unknownAS,orunknownlink
LSAs.
lsid (Optional)SpecifiesthelinkstateID.
adv‐router[rtrid] (Optional) DisplaytheLSAsthatarerestrictedbytheadvertising
router.Optionally,specifytherouterbyitsrouterID
(rtrid),enteredasa
32‐bitdotted‐quadvalue.
self‐originate (Optional)DisplayLSAsthatareself‐originated.
database‐summary (Optional)DisplaysthenumberofeachtypeofLSAinthedatabaseand
thetotalnumberofLSAsinthedatabase.