Enterasys G3G170-24 - Clear Logging Server; Show Logging Default

clear logging server
11-4 Logging and Network Management
clear logging server
UsethiscommandtoremoveaserverfromtheSyslogservertable.
Syntax
clear logging server index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThiscommandshowshowtoremovetheSyslogserverwithindex1fromtheservertable:
G3(su)->clear logging server 1
show logging default
UsethiscommandtodisplaytheSyslogserverdefaultvalues.
Syntax
show logging default
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThiscommandshowshowtodisplaytheSyslogserverdefaultvalues.Foranexplanationofthe
commandoutput,referbacktoTable 11‐1onpage 11‐2.
G3(su)->show logging default
Facility Severity Port
-----------------------------------------
Defaults: local4 warning(5) 514
index Specifiestheservertableindexnumberfortheservertoberemoved.
Validvaluesare1‐8.