Enterasys G3G170-24 - Configuring SNMP Notification Parameters; About SNMP Notify Filters; Commands

Configuring SNMP Notification Parameters
5-28 SNMP Configuration
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearSNMPtargetaddressentry“tr”:
G3(su)->clear snmp targetaddr tr
Configuring SNMP Notification Parameters
About SNMP Notify Filters
ProfilesindicatingwhichtargetsshouldnotreceiveSNMPnotificationmessagesarekeptinthe
NotifyFiltertable.Ifthistableisempty,meaningthatnofilteringisassociatedwithanySNMP
target,thennofilteringwilltakeplace.“Traps”or“informs”notificationswillbesenttoall
destinationsintheSNMPtargetAddrTa ble
thathavetagsmatchingthosefoundinthe
NotifyTable.
WhentheNotifyFiltertablecontainsprofileentries,theSNMPagentwillfindanyfilterprofile
namethatcorrespondstothetargetparameternamecontainedinanoutgoingnotification
message.Itwillthenapplytheappropriatesubtree‐specificfilterwhengeneratingnotification
messages.
Purpose
ToconfigureSNMPnotificationparametersandoptionalfilters.Notificationsareentitieswhich
handlethegenerationofSNMPv1andv2“traps”orSNMPv3“informs”messagestoselect
managementtargets.Optionalnotificationfiltersidentifywhichtargetsshouldnotreceive
notifications.ForasampleSNMPtrapconfigurationshowinghowSNMPnotificationparameters

areassociatedwithsecurityandauthorization criteria(targetparameters)andmappedtoa
managementtargetaddress,referto“CreatingaBasicSNMPTrapConfiguration”onpage 5‐36.
Commands
For information about... Refer to page...
show newaddrtrap 5-29
set newaddrtrap 5-29
show snmp notify 5-30
set snmp notify 5-31
clear snmp notify 5-32
show snmp notifyfilter 5-32
set snmp notifyfilter 5-33
clear snmp notifyfilter 5-34
show snmp notifyprofile 5-34
set snmp notifyprofile 5-35
clear snmp notifyprofile 5-36