Enterasys G3G170-24 - Set Tftp Timeout; Show Tftp Settings

show tftp settings
2-48 Basic Configuration
Mode
Switchcommand,read‐write.
Usage
Usethedircommand(page2‐43)todisplaycurrentimageandconfigurationfilenames.
Example
Thisexampleshowshowtodeletethe“Jan1 _2004.cfg”configurationfile:
G3(su)->delete configs/Jan1_2004.cfg
show tftp settings
UsethiscommandtodisplayTFTPsettingsusedbytheswitchduringdatatransfersusingTFTP.
Syntax
show tftp settings
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
TheTFTPtimeoutvaluecanbesetwiththesettftptimeoutcommand.TheTFTPretryvaluecan
besetwiththesettftpretrycommand.
Example
Thisexampleshowstheoutputofthiscommand.
G3(ro)->show tftp settings
TFTP packet timeout (seconds): 2
TFTP max retry: 5
set tftp timeout
UsethiscommandtoconfigurehowlongTFTPwillwaitforareplyofeitheranacknowledgement
packetoradatapacketduringadatatransfer.
Syntax
set tftp timeout seconds