Furuno FEA-2107-BB - 8.3 Loading S57 Charts

3. ECDIS Display
3-9
Information in autopilot sidebar
The following information is shown in the autopilot sidebar, which shows settings and readings from an autopilot.
• Steering mode (below "Autopilot")
• Prog CSE: If you use program track or program
heading change steering modes, planned course is
shown.
• Set CSE: Actual set course
• Set HDG: Actual set heading
• Radius: Actual set radius
• ROT: Value for ROT
• Cond: Setting for loading condition
• Perf: Setting for steering accuracy
• Off track: Distance from center line of planned route
238
Autopilot
0.3
53
MEDIUM
MEDIUM
<118
RADIUS CONTROL
Information in conning display sidebar
The following information is shown in the conning display sidebar:
• ROT indicator
• Heading indicator
• Speed indicators
• Longitudinal speed and source of speed
• Transversal speed
• Rudder angle indicator
Transversal
speed (frwd)
Longitudinal
speed
Transversal
speed (aft)
Information in docking sidebar
The following information is shown in the docking sidebar:
• ROT indicator
• Heading indicator
• Speed indicators
• Longitudinal speed and source
of speed
• Transversal speed
• Rudder angle indicator
• Depth below transducer
• On bow
• On stern
Transversal
speed (frwd)
Longitudinal
speed
Transversal
speed (aft)
Depth (at bow)
Depth (at stern)
Depth