8. Vector Chart Material
8-41
8.6.7 Services provided by an RENC
How to display the coverage of an RENC service
To view the Product List in graphical presentation, use the catalogue, which you may display by opening the Chart
menu and choosing Chart Catalogue. The catalogue of S57 charts shows when you last ordered the Product List
from an RENC or loaded the latest Base or Update CD-ROM into the ECDIS.
Note: The ECDIS automatically keeps the latest available Product List. Thus the ECDIS does not load the Product
List if it is older than the one already loaded into the ECDIS.
CD RENC SENC C-Map
kn
kn
kn
+
60
°
03.400'N 1.453 NM
024
°
58.372'E 352.0
°
HDG (MAN) 289.0°
SPD (MAN) 0.0kn
SB (MAN) 0.0kn
COG (MAN) 289.0°
SOG (MAN) 0.0kn
The chart limit boxes are color-coded as follows:
Green
The chart is available for use in SENC format. If the source of the chart is an RENC, then the chart is
also up-to-date. If the source of the chart is something other than an RENC, then all loaded updates are
included into the SENC.
Orange
The chart is available for use in SENC format but the chart is either NOT
up-to-date or has been
cancelled. Either the SENC is from a previous edition, the latest SENC update was missed or the chart
has been cancelled.
Red
If the chart is permit free, you do not have it available for use in SENC format and thus you cannot use
the chart currently.
If the chart requires a permit and you do not have the permit for the chart, you cannot use the chart
currently.
Blue
The chart is available either in ENC format, in SENC format for another software version or in SENC
format for another ECDIS. For example the chart is blue during SENC conversion and if you loaded a
chart into the ECDIS and the system could not convert the chart into SENC format.
Magenta
You have a permit to use the chart, but the chart is not available in SENC format and thus you cannot
use the chart currently.
To Next Page
Loading...
