Appendix 4: C-MAP CM-93/3 Charts
AP-48
A4.6.2 How to add license from file
To get access to CM93/3 chart data base, you have to enter a code that is received from C-Map directly or through
Chart agent. The code defines coverage of charts you can display on ECDIS.
To enter code do as follows:
1. Menu -> Chart Menu -> C-Map Ed3 -> Licenses
2. Click Add Licenses from file.
3. Select desired drive (A:\).
4. Click OK button. You have to confirm load of new code
To Next Page
Loading...
