Furuno FEA-2807 - How to Load a New ARCS Chart into the System; How to Load ARCS Charts by Permits

9. Raster Chart Material
9-17
9.9 How to Load a New ARCS Chart into the
System
You may load a new ARCS chart into the system for which you have a permit, by the following methods.
• Load by permit. Load all the charts that are covered in your license. The system will load them automatically.
• Load by active group. Define a group of charts to be loaded into the system. It can be useful to define groups
to make it easier to maintain your chart database.
• Load manually. Manually load charts into the system.
9.9.1 How to load ARCS charts by permits
[Load Charts]
By Permits
By Group
Manual
Go Back
1. Select Load Charts from the Chart menu and By Permits from the sub menu.
2. Insert desired CD-ROM into the CD-ROM drive then click the Load button.
The progress indicator shows the number of charts loaded and the number of
charts to be loaded.
Progress Dialog
Chart:
89 Of 3119
126
3. Repeat step 2 until you have loaded all the CD-ROMs covered in your license.
After you have loaded all CD-ROMs, click the X on the ARCS Load window
to close the window.