Furuno FEA-2807 - How to Use Notes

16. Notes
16-3
16.2 How to Use Notes
To prepare Notes, do the following:
1. Click Notes in the information area then click the Plan or Monitor button as appropriate. If no Notes is
selected, the Notes menu (shown below) appears in addition to the Monitor Notes dialog box or Plan Notes
dialog box.
2. If no menu appears, click the same button once more to open the menu.
Go Monitor mode> Go Monitor mode, Notes used in the planning mode can
be switched directly to the monitoring mode. Using
Go Plan mode> Go Plan mode, Notes used in the monitoring mode can be
switched directly to the planning mode.
Select: Selects Notes to use, monitor or planning mode.
Unselect: Unselect removes Notes from active use.
Backup and Restore: User can make backup copy from Notes or restore from
backup media.
Report: Generates tabulated report from selected Notes.
Note:
If you want Notes to be displayed on the electronic chart, make sure that Notes options are turned on in the
Mariner page of the Symbol Display dialog box.
i
i
THIS IS A TEST
i
i
THIS IS A TEST
1. 2. 3. 4.
Position
marker
Position marker
and text
Position marker
and range marker
Position marker,
text, and range marker
Four different variations as examples of how Notes is presented on the chart area:
1. Position marker
2. Position marker and text
3. Position marker and range marker
4. Position marker, text and range marker