Furuno FEA-2807 - 14 Route Monitoring; Introduction; How to Select Route to Monitor

14-1
14. Route Monitoring
14.1 Introduction
Route monitor is a means for permanent monitoring of the ship’s behavior relative to the monitored route. The
information area displays the data on the ship’s position relative to the monitored route. The monitored route
consists of the following information, displayed in the electronic chart area:
• The route is displayed with a thick, red dashed line.
• The limits of channels of each leg are displayed with solid red lines. These limits are used to detect chart alerts
when you are monitoring the route. For further details, see section 11.2 "Chart Alert".
• Each leg has information about planned speed and course to steer.
Note: In order to display charts with correctly updated situation, always use current date as Approve Until and
Display Until during your voyage. If your voyage lasts more than one week, set current date at least once per week
during your voyage. For details, see section 8.13.
14.2 How to Select Route to Monitor
Select Route
Monitor

Plan

X
Route: not selected
(WT)
To select the route to monitor, click Route in the information area, put the cursor in the Monitor combo box, spin the
scrollwheel to select route then push the scrollwheel.