24. Recording Functions
24-2
24.3 Details Log
The details log contains voyage information of the last 12 hours. Various information is recorded in the Details log
once per minute.
• Date and time
• Position of your ship as output by selected navigator.
• Alignment (range, bearing) values, if used.
• Speed over ground and course over ground.
• Heading.
• Gyro correction value, if used.
24.3.1 How to show the details log
To open the Details log, do as follows:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions
area then push the left mouse button.
2. Select Record from the menu then push the scrollwheel.
3. Select Details Log from the menu then push the scrollwheel. The following
window appears.
4. Confirm that you want to open the log by clicking the OK button.
Otherwise click the Cancel button. The system will start viewing program
of log.
You may print the entire log or a desired part. To change print font size, put the
cursor on the triangle and select desired font size. To print the log, click the
Print Log button. To print whole log, select Print All from the menu.
Use First 1000, Prev 1000, Next 1000 and Last xxx buttons to select desired time to be listed in log viewer.
Note: You can make a user chart from this log. See section 24.10 " How to Make a User Chart from a Log (past
track)".
To Next Page
Loading...
